How to ensure safety in piezometric hose installation process
Article : Ludun
Time : 2015-10-08
PV：
Pressure hose is widely used in daily life, if there is a certain understanding to its, would be better to play its role, but if use undeserved, also can produce certain negative effect.So, piezometric hose during the installation process should be how to ensure safety?Next, hengtong LTD will provide you with six Suggestions:
1. The piezometric tube hose connection at installation time, forbidden ultra displacement limit installation.
2. Install the bolt to symmetry, step voltage tightened, in case of partial leakage.
3. The piezometric tube hose connection in transportation loading and unloading, sharp instruments are forbidden to cut surface, sealing surface.
4. Vertical installed on both ends of the joint pipe should be vertical force bearing, and can be pulled off prevention device, in order to prevent the work pressure pulled off.
5. Piezometric tube hose coupling installation site should be far away from heat source.Ozone area.It is forbidden to strong radiation light exposure and use the medium do not meet the requirements of the product.
6.1.6 MPa above work pressure, installation bolt to elastic pressure pad, bolt looseness in case work.
Mobile station
